Jerry E. Howell Model Project Plans & Kits
Outpost Enterprises, LTD - 695 Godfrey Road - Hollansburg - Ohio 45332 - USA

(World Wide Supplier of Quality Model Project Plans & Kits Since 1992)


[ Home Page ]

For faster service, please order on-line from our new website at www.model-engine-plans.com

Kits & Parts Order Form - 2016
Please print this form to place an order.
Orders from outside the USA , see "How To Order Info".

---

Project Materials Kits

Qty.	Description	$ Price	$Total
	"Miser" Stirling Engine - Graphite & Bearings Kit	17.00
	"Vintage" Stirling Engine "HTF" Materials Kit	17.00
	"Vickie" Stirling Cycle Engine - Graphite & Bearings	16.00
	"Beamer" Stirling Cycle Engine - Graphite & Bearings	35.00
	"Ringbom" Stirling Engine - Graphite & Bearings	16.00
	Duplex Vacuum Stirling Engine - Graphite & Bearings	16.00
	"4-In-1" Atmospheric Engine - Graphite & Bearings	25.00
	Sideshaft Vacuum Engine - Graphite & Bearings	15.00
	"Super Fan" Stirling Engine - Graphite & Bearings	22.00
	Mini Stirling Cycle Engine Fan - Graphite & Bearings	17.00
	"PowerHouse" Engine - Ball Bearings (4)	15.00
	V-Twin "O" Rings, Gaskets, Fasteners, Etc. Kit	39.00
	Magnetic Drive Water Pump "HTF" Materials Kit	13.00

Precision Instrument Ball Bearings
All ball bearings have shields on both sides unless otherwise noted.

Qty.	Description	$ Price	$Total
	.125" ID x .250" OD x .109" thick	3.50
	.125" ID x .312" OD x .140" thick	8.00
	.125" ID x .312" OD x .140" thick, flanged	8.00
	.156" ID x .312" OD x .125" thick, flanged	6.00
	.187" ID x .312" OD x .125" thick (Only 4 left to sell)	3.00
	.187" ID x .312" OD x .125" thick, flanged	6.00
	.187" ID x .375" OD x .125" thick	6.00
	.187" ID x .375" OD x .125" thick, flanged	6.00
	.250" ID x .375" OD x .125" thick	3.00
	.250" ID x .375" OD x .125" thick, flanged	3.00
	.250" ID x .500" OD x .187" thick	4.00
	.250" ID x .500" OD x .125" thick, shielded one side	3.00
	.375" ID x .625" OD x .156" thick	4.50
	8mm ID x 22mm OD x 7mm thick	2.00

Super Fine .001" Fuel Filters
Almost all fuel has some very fine lint in it and your model gas engine needle jets are too
small for some of it to pass. These filters will not pass any particle larger than .001" and
will probably solve those "mysterious" fuel adjustment problems you may now have.

Qty.	Description	$ Price	$Total
	1" diameter x .005" thick, with application drawing	1.50

Transistor Ignition Module Kits

Qty.	Description	$ Price	Total $
	TIM-6 kit components	20.00
	Deluxe TIM-6 kit components	25.00
	Deluxe TIM-6 assembled & tested	40.00
	Electronic Buzz Coil kit	30.00
	Electronic Buzz Coil, assembled & tested	55.00
	PICTIM ignition module kit	30.00
	PICTIM ignition module, assembled and tested	55.00
	PIC chip for PICTIM (required), circle BASIC or BUZZ	10.00
	Extra 1/8" dia. x 1/16" thick rare earth magnet	.50
	2mm dia. x 1mm thick rare earth magnet	.50
	Extra Hall Sensor for "TIM-6" kit	2.50
	Rimfire 1/4-32 Spark Plug ($24.00 each when ordering 4 or more)	25.00
	NGK-CM6  10mm Thread Spark Plug	6.00
	30" Length of 1/8" Diameter High Voltage Ignition Wire	7.50
	Universal 6/12 Volt ATV Ignition Coil	21.00
	Power Keg 6 Volt Compact Ignition Coil w/Isolated Windings	49.00

(2017 Order Form)         Kits & Parts Ordered	$_______
Ohio Residents must add 7% Sales Tax:	$_______
Postage & Handling in USA for Kits/Parts	$   7.50
Postage & Handling to Canada for Kits/Parts	$   12.00
Air Mail Postage & Handling Outside North America   ( See "How To Order" Page )	$   19.00
Total of Kits & Parts Order	$_______

We now also accept payments via PayPal.
If you are also ordering plans from the "Project Plans Order Form",
please disregard everything below this line.

---

Please make checks or money orders payable to: Outpost Enterprises, LTD
Canada & Overseas Bank Checks or Moneyorders
MUST have an affiliate US bank imprinted on the front.
Ship to:   Please print legibly so I can get your address label correct!

Name:	E-mail:
Street Address:
City:	State:	Zip:
Country (if not USA):

Thank you for your order


[ Home Page ]